Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA

Product Details
Customization: Available
Application: Power, Electronic, Instrument, Lighting, Rectifier, Audio
Phase: Three
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
103
Year of Establishment
2014-05-30
  • Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA
  • Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA
  • Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA
  • Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA
  • Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA
  • Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA
Find Similar Products

Basic Info.

Model NO.
SCB10-800KVA
Core
Core-type Transformer
Cooling Method
Dry-type Transformer
Winding Type
Two-winding Transformer
Certification
ISO9001-2000, ISO9001, CCC
Usage
Combined Transformer, Power Transformer, Distribution Transformer
Frequency Characteristics
Power Frequency
Shape of Core
OD
Brand
Rooq
Altitude
1000m
Certificate
ISO ,CE
Service Condition
Indoor
Transport Package
Wooden Case
Specification
SCB10-1000KVA/11KV
Trademark
ROOQ
Origin
Wenzhou/China
HS Code
8504349000
Production Capacity
5000mva One Year

Product Description

Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVAElectrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVAElectrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVASCB series dry type transformers refer to transformers in which the core and windings are not immersed in insulating oil. The cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). When natural air cooling, the transformer can run continuously for a long time under the rated capacity. When forced air cooling, the output capacity of the transformer can be increased by 50% in short time. It is suitable for intermittent overload operation or emergency accident overload operation; due to the large increase in load loss and impedance voltage during overload, it is in an uneconomic operation state, so it should not be kept in continuous overload operation for a long time.

1.Power Capacity: 30-16000KVA

2.Voltage Level: 10KV,20KV,35KV or Others

3.Type of Voltage Regulation: Off-circuit or On-Ioad

4.Tapping Range: ±5 %  ±2x2.5 % ±4x2.5 %

5.Frequency: 50Hz or 60Hz

6.Phases: Three or Single

7.Connection Symbol: Dyn11,Yyn0 ( or as requested)

8.Short- circuit Impedance:  Standard Impedance

9.Maxmun Temperature Rise: 100K

10.Insulation Class:Class F or H

11.Protection Class:IP00/IP20/IP23/IP40/IP50

12.Altiude is not exceeding 1000m,ambient temperature not exceeding 40ºC. If it can't meet such conditions,we will modulate parameters in accordance with standard.

 

Dry Type Power Transformer Features:
Since epoxy resin is a non-flammable, flame-retardant, self-extinguishing solid insulating material, safe and clean, epoxy resin cast dry-type transformers are oil-free, non-flammable, and have low operating loss, strong short-circuit resistance, less maintenance work, high working efficiency, small volume and low noise. It is often used in places with high performance requirements such as fire prevention and explosion protection, and has the following practical characteristics:
1.It is safe, fireproof, pollution-free, and can be directly operated in the load center;
2.High mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability and long service life;
3.Low loss, low noise, obvious energy saving effect, maintenance-free;
4.Good heat dissipation performance, and capacity operation can be increased in short time when forced air cooling;
5.Good moisture resistance;
6.Dry-type transformers can be equipped with a complete temperature detection and protection system. Using intelligent signal temperature control system, it can automatically detect and display the respective operating temperatures of the three-phase windings, can automatically start and stop the fan, and have functions such as alarms and trips. IS485 communication interface can be installed to realize wireless detection and intelligent management.
7.Small size, light weight, less space and low installation cost.

 

Dry Type Power Transformer Standard:
IEC60076, GB/T1094.11, GB/T17211.


Dry Type Power Transformer Applicable Environment:
1.0-40 (ºC), relative humidity <70%;
2.Altitude: no more than 2500 meters;
3.Avoid rain, humidity, high temperature, high heat or direct sunlight. 
4.Prevent working in places where there are more corrosive liquids, or gases, dust, conductive fibers or metal fines;
5.Prevent working in vibration or electromagnetic interference places;
6.Avoid long-term storage and transportation upside down, and avoid strong impact.

Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA

 


Rated Capacity
(kVA)
Rated Voltage (KV) Vector Group Short-Circuit Impedance
(%)
Loss(kW)  No-load Current
(%)
Weight(kg) Outline Dimension
(L×W×H,mm)
Enclosure Dimension
(L×W×H,mm)
High voltage (KV) High voltage tapping range Low voltage (KV) No-load Losses Load Losses
30 6KV   6.3KV
6.6KV  10KV 11KV 13.8KV
 ±5%
 ±2× 2.5%
0.4  Dyn11
Yyn0
4 0.195 0.71 2.5 340 780×450×790 900×900×1080
50 0.275 0.95 2.2 430 840×450×855 1000×900×1150
80 0.375 1.385 2.1 560  900×600×885 1060×1000×1180  
100 0.405 1.58 1.9 720 920×600×900 1080×1000×1200
125 0.475 1.895 1.8 830 980×600×960 1140×1000×1260  
160 0.55 2.14 1.8 940  1040×710×1000 1240×1050×1300
200 0.63 2.54 1.6 1250 1070×710×1200 1270×1050×1450  
250 0.73 2.77 1.5 1450  1140×710×1245 1340×1050×1550
315 0.89 3.485 1.4 1600 1180×710×1300 1360×1050×1600
400 0.99 4.01 1.4 1980 1380×960×1425 1540×1150×1720
500 1.175 4.91 1.3 2300 1400×960×1515  1570×1150×1810
630 1.36 5.91 1.3 2570 1440×960×1595  1610×1150×1900
630 Dyn11
Yyn0
6 1.315 5.995 1.2 2550 1500×960×1405 1660×1150×1700
800 1.54 6.99 1.2 2810 1560×960×1575          1680×1150×1870
1000 1.79 8.17 1.1 3210  1640×960×1685 1750×1200×1980
1250 2.115 9.75 1.1 3400 1700×1255×1815 1850×1400×2120
1600 2.48 11.8 1 4150 1800×1255×1980 1920×1400×2280
2000 3.36 14.535 0.9 5600 940×1255×2110 2050×1450×2420
2500 4.05 17.27 0.8 6300 2060×1255×2350  2170×1450×2750
Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA

Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA
Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA

 Electrical Power Distribution Epoxy Resin Cast Dry Type Transformer 800kVA

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier
People who viewed this also viewed